GPS-DS-10

Double Signal Generator with Exchange System

GPS-DS-10 features:

Switch unit
- 10 independents BNC connectors at 10 MHz frequency, with 13 dBm each of power level,
- 10 independents PPS connectors with TTL level terminated at 50 Ohm,
- 7 dry contact for electrical signaling of switch unit,
- 4 photo-coupled input for switch unit remotization,
- Serial connection in RS232 Standard,
- Standard network connection Ethernet 10/100 with TCP/IP protocol complete of descriptive MIB on SNMPv1 protocol,
- Web server integrated for direct browser management,
- Device's supply in logical OR,
- AC: 85 Vac - 265 Vac 50/60 Hz,
- Rack 19’’ of 1U.
Generator module
- High-stability inner oscillator OCXO with a full frequency drift of +/- 1*10-10 free run day operation,
- 12 channels GPS receiver with automatic tracking and timing error management system,
- New design DPLL fast lock,
- 10 independent sine wave outputs at 10 MHz frequency with 13 dBm power level each,
- 10 PPS outputs with TTL level terminated at 50 Ohm,
- Electrical/serial signaling system turned towards switch unit,
- Device's supply in logical OR,
- AC: 85 Vac - 265 Vac 50/60 Hz,
- Removable drawer container 120x220 mm.

Request Quote/Info View Datasheet

Overview

GPS-DS-10 is a Time and Frequency multi-output signal generator (PPS, 10 MHz). It's formed by two independent GPS receivers individually furnished with high-stability oscillators. The two “hot-plug” modules are in mutual support. In the standard version are presents 10 independent outputs of the frequency reference at 10 MHz and as many of the time reference PPS (pulse per second).
GPS-DS-10 is extremely reliable because both generator modules are completely autonomous, because are furnished within of supply section and amplification of 10 MHz signal and PPS. The switch unit is completely passive and the choice between the two generator modules is realized by means of high-reliability RF relays.
Each of the 10 frequency output (10 MHz) and of the 10 time output (PPS), coming from the two generator modules, it's continually monitored from exchange logic, who select the module that will pass into BNC connectors placed on the back. If breakdown of preferential generator module will occur, as well as a electrical signaling series and SNMP trap's generation, will immediately done the switching on spare generation module.

The switching algorithm is completely user-definable.
Is in fact at user discretion the possibility to set the commutation even if only electrical lack happened at one of the 10 MHz signals and PPS signals, coming from preferential generation module, rather than enter about coherence's of same signal, of this fact that could break the GPS module receiver or rather could be a RF signal breakdown coming from antenna.
GPS-DS-10 is particularly easy to use both for installation and maintenance. All function are completely accessible by PC in local mode, through RS-232 serial communication, and in remote mode through Ethernet network 10/100 with TCP/IP protocol. GPS-DS-10 furnish indications about its working state even through use of 7 dry contact on apparatus back.
GPS-DS-10 is completely SNMP protocol standardized in which are supplied from switch unit all the informations about the electrical state of both modules. GPS-DS-10 is provided of double power unit for the part related at switch unit. Both generation modules are provided of internal power unit really independent from switch unit.
Documentation

Product Manuals & Application Notes:
- Datasheet (MD5: 0f7b05b0a24b10e85590ae14a2bb1fc5)
- GPS-DS-10 Update Errata Corrige v1.2 (MD5: 847ab11428d2256b15770bfd8e1e6deb)
Software
Related Products

9151 Views